The REOVIB MTS 610 series are used for controlling the throughput of vibratory feeders with an electromagnetic
drive. They can be used with vibratory feeders that operate with a mechanical vibrating frequency of
100 / 50 / 33,3 / 25 / 16,6 Hz ( 50 Hz supply).
Throughput control is achieved by using thyristors with phase-angle firing. The setpoint input can entered
through a user display in the front panel or derived from an external potentiometer, a 0…+10 Vdc or a
0(4)…20 mAdc signal. Internal parameters “MIN” and “MAX”can be used to provide a linear set point range.

The REOVIB MTS series includes single-channel, two-channel and three-channel control units for vibratory conveyor drives. These are phase-angle control systems. The vibration frequency of the conveyor can be the same as or twice the frequency of the input voltage. (Other frequencies are possible depending on the type). Plug and socket connections for all inputs and outputs make rapid installation possible and facilitate the combination of several devices with each other or with external control systems. The devices use digital technology and are operated via a LED or LCD display and buttons. All settings can be made without the housing having to be opened.

• Phase-angle control with programmable functions
• Single-channel control for the optimal control of the complete conveyor system
• IP20 design
• Automatic mains voltage adjustment
• Material flow control
• Various sensor logic functions can be set
• Adjustable soft start
• With fill level/overflow control
• Integrated mains voltage compensation with constant vibration amplitude